The Secureye S-4FE-2UE-LD is a 6-port PoE switch (4 PoE + 2 uplink) designed to deliver both data and electrical power over a single Ethernet cable to compatible network devices such as IP cameras, Wi-Fi access points, VoIP phones, and more. It’s particularly suited for CCTV surveillance systems, small offices, retail spaces, and other environments where simplicity, reliability, and affordability are important.
🌐 Key Features & Capabilities
✅ PoE & Network Ports
-
4 x 10/100 Mbps PoE RJ45 ports for powering PoE devices directly.
-
2 x 10/100 Mbps uplink RJ45 ports for connecting to routers, NVRs, or other switches to expand your network.
Supports just plug-and-play connectivity without needing complex configuration.
⚡ PoE Standards & Power
-
Conforms to IEEE 802.3af/at standards, ensuring compatibility with most PoE equipment.
-
Provides up to 30 W of PoE power per port (power budget varies by specific unit), suitable for cameras and access points.
-
Total PoE power budget around ≤ 78 W (approximate) depending on model/configuration.
📡 Extend & Transmission
-
Supports long-distance PoE transmission up to ~250 m on PoE ports (when extend mode is enabled and using proper Cat5e/Cat6 cable), which is useful for remote cameras or devices located far from the switch.
🔹 Switching Capability
-
Store-and-forward switching for efficient packet handling.
-
Forwarding rate suitable for typical CCTV and small-office traffic.
-
Auto MDI/MDIX support on uplink ports simplifies connection types (straight vs crossover).
🔹 Indicators & Ease of Use
-
LED indicators for Power, PoE status, and Link/Activity make monitoring easy.
-
No fan means silent operation and lower maintenance.
🧰 Typical Uses
📍 CCTV Surveillance – Power and connect up to four IP cameras from a single switch.Sharp Imaging
📍 Wi-Fi Access Points – Provide data + power to wireless access points without separate adapters.Sharp Imaging
📍 Small Office Networks – Add PoE capability to a small LAN with minimal setup
Reviews
There are no reviews yet.